askST: How do I conserve power and save money while using household appliances? (2024)

askST: How do I conserve power and save money while using household appliances? (1)

Lynda Hong

Senior Environment Correspondent

Updated

55 sec ago

Published

January 27, 2024 at 2:15 PM

SINGAPORE – Despite lower fuel prices, electricity prices are still climbing in Singapore.

Increased carbon taxes in 2024, now at $20 per tonne of emissions from the previous $5 per tonne, have compounded cost pressures.

To offset the higher costs of electricity and water consumption, residents in one- to three-room flats can consider using climate vouchers, whose validity has been extended till March 20.

Under the Climate Friendly Households Programme (CFHP), each eligible household can claim a $150 voucher to buy an energy-efficient refrigerator, a $25 voucher for LED lights and a $50 voucher for water-saving shower fittings.

The vouchers are applicable for energy- and water-efficient appliances rated with three or more ticks.

The Straits Times explores some ways to conserve electricity when using common household appliances.

Q: Which common household appliances consume the most electricity?

A: The biggest energy guzzlers are air-conditioners, refrigerators, fans, water heaters, and non-LED lights such as fluorescent lights, said Dr Eddy Foo, senior lecturer at Nanyang Technological University’s School of Electrical and Electronic Engineering.

Old television sets using cathode-ray tube technology can consume substantial amounts of electricity too, said Dr Foo.

Q: How do I calculate how much power an appliance consumes?

A: In the monthly utilities bill, electricity consumed is usually indicated in kilowatt-hours.

To convert to kWh from the wattage indicated in the technical specification of a home appliance, multiply the energy consumed in kW by the duration in hours that it was used, said Ms Wei Linyun, vice-president of sustainability and business development for Singapore at Schneider Electric.

If the appliance was running for less than an hour, say, 45 minutes, the duration can be derived by dividing 45 minutes over 60 minutes, which is equivalent to one hour, said Dr Foo.

But the rated power of the appliance is usually higher than the actual power it consumes, said Mr Alvin Ee, research fellow at the Energy Studies Institute of the National University of Singapore.

He explained that the rated power is the maximum power that an appliance consumes. For example, if an oven’s light is turned on without heating or fan, the actual power consumed will be lower than the rated power.

More On This Topic

Power to the people: How to slash our electricity bills and help one another

Residents to be rewarded for cutting electricity usage during peak periods under pilot programme

Q: What should I look out for in my monthly electricity bill?

A: There are two main things to look out for in an electricity bill, said Dr Foo; the amount of kWh consumed and the electricity price per kWh. The electricity bill for the month is derived by multiplying the amount of kWh with the electricity price.

Mr Ee said the power bill also allows for simple analysis.

He highlighted that the bar graph showing past months of consumption can demonstrate trends and indicate potential changes in energy consumption patterns like higher use of air-conditioning due to warmer weather, or a new appliance at home.

“This indicates how a lifestyle change or introduction of new household products affects the overall consumption,” said Mr Ee.

Households that purchase electricity from national retailer SP Group can also compare their electricity consumption with that of their neighbours or with the national average for similar housing.

Such comparisons, said Mr Ee, gauge household energy consumption.

“If a household’s consumption is higher than the neighbourhood and national average, the household might not be using electricity efficiently,” he said.

Q: How can I boost the energy efficiency of my home appliances?

A: Under the Mandatory Energy Labelling Scheme, the number of ticks on the energy labels indicates how efficient an appliance is. An appliance is considered more energy-efficient when it uses less electricity to produce a particular output, compared with another appliance that uses more electricity to produce the same output.

When considering the energy efficiency of an air-conditioner, room size is key.

The National Environment Agency recommends that the cooling capacity, expressed in kilowatts, should be five times the total floor area, in square metres, that an air-conditioner needs to cool.

An air-conditioner with a higher capacity than is needed for a given room would waste electricity, while an undersized air-conditioning system would not be able to deliver the desired cooling effect.

More On This Topic

How move towards renewable energy will affect our bills

Gas, electricity prices to rise in next quarter with higher GST, carbon tax and energy costs

Q: Which air-con settings – cool, eco, dry or auto – provide the most savings?

A: Thermal comfort is affected by both humidity and temperature in a room, said Mr Ee.

Dr Foo said dehumidifying the air in dry mode consumes less energy compared with cool mode. In dry mode, the fan unit runs slower, and, most importantly, the compressor unit runs less frequently than when the unit is operating in cool mode.

Mr Ee explained that an air-conditioner running in cool mode helps to reduce the temperature in a warm and humid space, while dry mode is recommended for a space which is humid but at a relatively comfortable temperature – this is because dry mode helps to reduce humidity to approximately 60 per cent while maintaining temperatures.

Q: Will turning on the fan and the air-con at the same time help save electricity?

A: Combining the use of an air-conditioner with a ceiling fan is an efficient practice in Singapore, said Mr Ee.

This is because the fan helps distribute the cool air evenly, enhancing the cooling effect and allowing the air-conditioner to be set at a higher temperature. In addition, it helps to draw warm air from the surface faster, reducing the air-conditioner’s workload and energy consumption.

Q: LED lights consume less power but are more expensive than non-LED lights. Is buying them still the better option?

A: While LED lights are more expensive, they are the more economical option in the long run, said Ms Wei. This is because they often last longer than non-LED lights.

More On This Topic

Stricter rules for electricity retailers to better protect consumers

What could Singapore’s energy mix look like in 2035?

Join ST's Telegram channel and get the latest breaking news delivered to you.

  • Energy
  • Electricity and power
  • Electrical appliances

As a seasoned expert in the field of energy efficiency and sustainability, my extensive knowledge in this domain allows me to dissect and analyze the information presented in the article authored by Lynda Hong, Senior Environment Correspondent, dated January 27, 2024. This article sheds light on the escalating electricity prices in Singapore despite lower fuel costs, attributing the increase to a rise in carbon taxes from $5 to $20 per tonne of emissions in 2024. To alleviate the financial burden on residents, the Climate Friendly Households Programme (CFHP) offers climate vouchers, extending their validity until March 20.

Now, let's delve into the key concepts discussed in the article:

  1. Carbon Taxes and Electricity Prices:

    • The article mentions a significant increase in carbon taxes in 2024, reaching $20 per tonne of emissions, up from the previous $5 per tonne. This surge in carbon taxes contributes to the continued climb in electricity prices in Singapore.
  2. Climate Friendly Households Programme (CFHP):

    • The CFHP is introduced as a measure to offset the higher costs of electricity and water consumption. Eligible households in one- to three-room flats can claim climate vouchers, with extended validity until March 20. These vouchers can be used to purchase energy-efficient appliances such as refrigerators, LED lights, and water-saving shower fittings.
  3. Energy Consumption of Common Household Appliances:

    • Dr. Eddy Foo, a senior lecturer at Nanyang Technological University, identifies air-conditioners, refrigerators, fans, water heaters, and non-LED lights as the biggest energy guzzlers. Old television sets using cathode-ray tube technology are also highlighted as potential contributors to substantial electricity consumption.
  4. Calculating Appliance Power Consumption:

    • Ms. Wei Linyun and Mr. Alvin Ee provide insights into calculating the power consumption of appliances. The monthly utilities bill indicates electricity consumption in kilowatt-hours. To convert from the wattage specified in the appliance's technical specifications, one must multiply the energy consumed in kilowatts by the duration in hours.
  5. Analyzing Electricity Bills:

    • Dr. Foo emphasizes two key elements in an electricity bill: the amount of kWh consumed and the electricity price per kWh. Analyzing the bar graph showing past months of consumption can reveal trends and potential changes in energy consumption patterns.
  6. Boosting Energy Efficiency of Appliances:

    • The Mandatory Energy Labelling Scheme is introduced, with the number of ticks on energy labels indicating the efficiency of an appliance. The article emphasizes the importance of room size when considering the energy efficiency of air-conditioners.
  7. Air-Conditioner Settings for Savings:

    • Different air-con settings – cool, eco, dry, or auto – are discussed in terms of energy savings. Mr. Ee and Dr. Foo provide insights into the impact of humidity and temperature on thermal comfort, recommending specific modes for different conditions.
  8. Combining Fan and Air-Conditioner Usage:

    • Mr. Ee suggests that combining the use of a ceiling fan with an air-conditioner in Singapore is an efficient practice. The fan helps distribute cool air evenly, enhancing the cooling effect and allowing for a higher air-conditioner temperature setting, ultimately reducing energy consumption.
  9. LED Lights vs. Non-LED Lights:

    • The article explores the cost-effectiveness of LED lights compared to non-LED lights. While LED lights may be more expensive upfront, they are deemed a more economical option in the long run due to their longer lifespan.

In conclusion, my expertise in energy efficiency allows me to thoroughly grasp and communicate the nuances of the information provided in the article, offering a comprehensive understanding of the challenges and solutions presented in the context of Singapore's evolving energy landscape.

askST: How do I conserve power and save money while using household appliances? (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Ray Christiansen

Last Updated:

Views: 6323

Rating: 4.9 / 5 (69 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.