06/18/2024
PULLING UNITS / PUMP HOISTS AVAILABLE FOR SALE
PULSTAR P38000HD PUMP HOIST (Ref#10424T)
Manufactured 2007, sandline, ¾” X 210’ winch line, Oil Gear PVG-100 hydraulic pump, mounted on 2006 Peterbilt 357 truck with Cat C11 diesel engine, cross locks 13 speed gear, reduction transmission, heavy duty suspension, 44,033 miles, 15,486 hours (as of January 2024), fully operational Price: $235,000
PULSTAR P38HD PUMP HOIST (Ref#7296T)
Manufactured 2006, 44’ mast height, 15,000 lb single line pull, 2 and 3 part line blocks, sandline, breakout wrench, dual catheads, remote control on main line, hydraulic oil cooler, mast light with brush guards, air powered plumbed to rear, mounted on 2017 Peterbilt 337 truck with 10,000 miles, PX9 with Eaton Fuller RTO14908LL transmission, hydraulic power to the rear, 18’ steel flatbed with louvered headache rack Price: $337,500
PULSTAR P38000 PUMP HOIST (Ref#9499T)
Manufactured 2005, main line, tail out line, no sandline drum, mounted on Sterling truck with 55,000 miles, 85% tires Price: $187,500
PULSTAR P12000 PUMP HOIST (Ref#2390T) Manufactured 2020, sandline with free fall, 48' mast, hydraulic pipe racks, dual remotes, mounted on 2020 Ford F5504 x 4extendedcab with Powerstroke diesel engine, wire winder,available July 2024 (deposit will hold hoist) Price: $147,500
PULSTAR P12 PUMP HOIST (Ref#8391T)
Manufactured 2014, 46’ tower, sandline with free fall (less cable and hook), mounted on 2014 Ford F550 4x4 truck, approx. 92000 miles, 6.7L Power Stroke diesel engine, auto transmission, locking differentials, HD rear suspension, hydraulic outriggers and holding valves, remote control, solid aluminum pipe racks 18’ (2) with rack traps, front jack XL, power to rear, hydraulic oil cooler, HD tailgate, Omaha special lift top service body with 2’ flatdeck, HD headache rack, SS paddle latches, 11” HD tow bumper, wire mounts (front and rear), wire winder ready (lines tun to rear for wire winder), CETEC hydra-weld 300-10 welder/generator w/5’ leads, Kubota deck engine, available July 2024 (deposit will hold hoist) Price: $165,000
PULSTAR P12 PUMP HOIST (Ref#8333T)
Manufactured 2014, mounted on 2014 Dodge 5500 4 x 4 truck with 6.7L diesel engine, PTO, tailout winch, sandline, main winch, 46’ mast, front outrigger, 2 back outriggers, toolboxes, 162,000 approx miles, approx. 5500 hours (both idle and run time), new turbo diesel has approx. 300 hours, new DEF approx. 100 hours, resealed transmission Price: $122,500
PULSTAR P10 PUMP HOIST (Ref#5155Tb)
Manufactured 2014, mounted on 2014 Dodge RAM 5500, new Cummins engine with 15,000 miles, spare ECM for this motor Price: $65,000
PULSTAR P10000 (Ref#7213T)
Windmill extension, mounted on 2005 International truck with rebuilt DT466 engine, 7 speed Spicer transmission, remote control, sandline, toolboxes, 3 rear hydraulic leveling jacks, currently in field working Price: $45,000
PULSTAR P7 PUMP HOIST (Ref#3224T) Manufactured 2019, mounted on Ford F550 truck Price on Request
PULSTAR P7000 (Ref#3657T)
Built 2000, mounted on 2000 Ford F450 4 x 4 truck, 7.3L diesel engine, 235,000 miles Price: $47,500
PULSTAR P7 PUMP HOIST (Ref#9354T)
Mounted on 1999 Ford F450 truck, 7.3 Power Stroke diesel engine, standard transmission, new clutch 2019, Pac brake exhaust brake, new front drive tires 2019, rear tires 2018, approx 115,000 miles Price: $80,000
S25000 PUMP HOIST (Ref#5155TA)
Manufactured 2016, sandline, 2 tag out lines, 100,000 lbs pullback, rod spinner, block. mounted on 2016 International truck, automatic transmission, 8”-12” elevators Price: $215,000
SEMCO S25000 (Ref#12339Ta)
Manufactured 2009, mounted on 2009 F750 truck with 6.7 Cummins diesel engine, engine and transmission rebuilt 2017, 2 rear leveling jacks, no sandline Price: $89,500
SEMCO S15000 (Ref#11659Tb)
Manufactured 2010, no sandline drum, 200’ of ¾” mainline, mounted on 2006 International 4400 truck with DT466 diesel engine, 4 hyd jacks Price: $89,500
SEMCO S15000 (Ref#12339Tc)
Manufactured 2009, Standard mast with no extension, 200’ mainline, sandline drum (no line on it), new hydraulic drum motor and brake installed December 2023, mounted on 2002 Sterling tandem axle truck with Detroit Series 60, differential lockers, new tires, cosmetic damage on the hook, cosmetic damage on plastic on the inside on the dash, GVW 52,000 lbs., truck is roadworthy, 4 leveling jacks Price:$89,500
SEMCO S15000 PUMP HOIST (Ref#2573T)
Manufactured 2000, mounted on Ford F650 truck with Cat head, approx. 182,000 miles Price: $77,500
SEMCO S12000H PUMP HOIST (Ref#3338T)
Manufactured 2021, mounted on 2012 International cab with 500 miles on replaced 220 HP Max Force engine, hot shift PTO, DEF system removed from truck, automatic transmission, 2 speed winch with grooved drum, 2000’ capacity sand reel, 44’ hydraulically telescoping mast, 140’ fpm line speed, lifting capacity 36,000 lbs Price: $115,000
SEMCO S6000 PUMP HOIST (Ref#1667T)
Manufactured 2003, no sandline, mounted on 2003 Ford F550 4 x 4 truck with 6.0L diesel engine, wire remote control with throttle, cracked injector in 6.0L diesel engine (needs repair), truck does not start Price as is: $29,500
SEMCO S6000 PUMP HOIST (Ref#2926Ta)
Manufactured 1986, mounted on 1986 Ford F350 truck, 89,000 miles, new transmission and rear end, telescoping mast Price: $35,000
KYLE HYDROFRACKER WITH SEMCO S6000 CRANEAND WATER TRUCK (Ref#6981T)
KYLE HYDROFRACKER WITH SEMCO S6000 CRANE Mounted on 1988 International S1600, 5-1/2” packer, 840’ 1-1/2” frack pipe, 80’ zone frack pipe AND 2003 INTERNATIONAL 9211I WATER TRUCK 2700 gallon steel tank, 20’ flatbed with sides, 525,000 miles
Price for both: $95,000
SEMCO S4000 (Ref#13331T)
Manufactured 2005, 8000# cap, no cathead, no sandreel, utility bed, 33’ mast, remote control, toolboxes, mounted on 2016 Dodge Ram 3500 4 x 2 truck with Cummins diesel engine, 2 rear hydraulic jacks, has front fender damage Price: $52,500
SEMCO S4000 (Ref#13300RB)
Manufactured 2000, mounted on Ford F450 4x4 with diesel engine, 44' derrick, hydraulic wire reel with free fall, remote control, 8x12 steel flatbed, toolboxes, heavy duty trailer hitch, approx 225,000 miles, sitting since 2019, truck does not startPrice: $35,000
SMEAL 12T (Ref#11072Ta)
Manufactured 1991, mounted on 2004 Ford F750 truck with Cat 3126 engine, power to rear, cathead, breakout wrench, oil cooler, sandline, tail out line and main line, 30’ mast, 15’ deck with toolboxes Price: $110,000
SMEAL 12T PUMP HOIST (Ref#3955T)
Manufactured 1980, diesel deck engine, sandline, breakout cathead, telescoping mast, no remote, mounted on M9-32A2 5-ton military 6X6 truck with diesel engine, Allison automatic transmission, 2 rear leveling jacks, tooling: 7” bailer, rod slips, tubing slips, rod wrenches Price: $55,000
SMEAL 10T (Ref#11694T)
No sandline, no cathead, has plug in for remote control, but does not have remote, standard mast, mounted on 1997 Peterbilt with Cat C7 engine, new hydraulic hoses, 2 rear leveling jacks, paintedPRICE: $52,500
SMEAL 10T (Ref#3173T)
Sandline, mounted on 1991 International 5300 truck with DT366 diesel, 70,000 miles, windmill extension, cathead, hydraulic oil cooler, breakout wrench, tailout winch, remote control, 2 rear jacks Price: $62,500
SMEAL 10T PUMP HOIST (Ref#5155Tc) Mounted on 2004 International truck Price on Request
SMEAL 10T (Ref#3302T)
Manufactured 1975, sandline, mounted on 2001 International truck with DT466 engine, manual 6 speed transmission, hyd brakes, 32,312 miles, all new hydraulics January 2017, new style one body control from Hunke, no remote, updated hydraulic motors, set up for power tongs, 2 hyd tanks PRICE REDUCED: $43,500
SMEAL 10T PUMP HOIST (Ref#367T)
Manufactured 1975, mounted on 1975 Ford F600 with gas engine, new front tires, new brakes, windmill extension, sandline with 1000’ of ½” cable, cathead, breakout wrench, underdeck storage, chain wrenches, pipe wrenches, slings, elevators, bailer Price: $52,500
SMEAL 10T PUMP HOIST (Ref#8867T) Manufactured 1975, mounted on Ford truck, runs good but truck does not meet CA emissions, includes dump truck Price: $60,000
SMEAL 8T PUMP HOIST (Ref#12698T)
Unmounted, manufactured 1979, sandline, cathead, hoist only (truck not included) Price: $39,500
SMEAL 8T (Ref#12405T) Built 1979, sandline, mounted on Ford Louisville truck with diesel engine, no remote, no cathead, toolboxes, 1 front and 2 rear hyd jacks Price: $32,500
HUNKE 6T PUMP HOIST (Ref#9510T)
Manufactured 2017, mounted on 2017 Dodge Ram 5500 with Cummins 6.7L turbo diesel engine (approx. 47,000 miles), full lighting package, 2 manual tilt pipe racks, WeatherGuard toolboxes, no sandline, stored inside, excellent condition corded remote Price: $119,000
SMEAL 6T (Ref#15188T)
Manufactured 2014, mounted on 2013 Dodge 5500 4 x 4 truck with Cummins diesel engine, PTO, 345,000 miles, new tires, automatic transmission, cathead, wire spool brackets, two pipe racks (one is powered), rope sheave Price: $107,500
SMEAL 6T PUMP HOIST (Ref#1543T)
Built 2002, mounted on 2002 Ford 4 x 4 truck, 5 speed, 41,000 miles, 7.3L diesel engine, cord remote, new idle control, new cable, set up as single line, can use sandline, 34' mast, new tires, one owner Price: $82,500
SMEAL 6T PUMP HOIST (Ref#997T)
Manufactured 2001, mounted on 2011 Dodge 4WD truck with Cummins engine, approx. 160,000 miles, main line, sandline, no remote, poly wheel on back, utility body, 2 rear hydraulic leveling jacks Price: $82,500
SMEAL 6T PUMP HOIST (Ref#4829T)
Sandline with ¼” line, mounted on 2002 Sterling truck with Mercedes-Benz Model OM 906 LA engine with approx. 99,000 miles Price: $62,500
SMEAL 6T PUMP HOIST (Ref#7629T)
Manufactured 2000, mounted on 1995 Ford F800 truck with 98000 miles, Cummins diesel engine, Alliston automatic transmission, 46’ extended boom, no sandline Price: $55,000
SMEAL 6T PUMP HOIST (Ref#109T) Manufactured 2000, sandline, mounted on Ford F550 (not 4wd), 7.3 diesel engine, standard transmission, approx. 130,000 miles, clean condition Price: $72,500
HUNKE 5T PUMP HOIST (Ref#5246T)
Manufactured 2017, mounted on 2017 Ford F450 2WD truck, approx. 142,100 miles, 6.7L diesel engine, control levers outside the cage, dual pipe racks, wireless remote, 2 speed winch, 9’ Dakota utility body with top boxes Price: $110,000
SMEAL 5T PUMP HOIST (Ref#2359T)
Manufactured 1983, mounted on 2023 GMC 3500 truck, 6.6L gas engine, 950 miles, hoist completely refurbished, new cable, hoses, front jack, painted Price: $126,000
SMEAL 5T PUMP HOIST (Ref#9426T)
SMEAL 5T PUMP HOIST (Ref#12418T)
Manufactured 2008, on a 9’ RKI utility body, mounted on 2008 Ford F450 4 x 4, 6.4L V8 diesel engine, 6 sp transmission, 168,000 miles, new engine, DPF installed 2021, (2) 16’ pipe racks, corded remote, welder, generator Price: $70,000
SMEAL 5T PUMP HOIST (Ref#7656T)
Manufactured 2006, remanufactured 2023, mounted on 2017 Ford F450 truck, 177,000 miles, tilt rack on passenger side, front jack, work lights, 9’ box Price: $95,000
SMEAL 5T PUMP HOIST (Ref#7620T)
Manufactured 2006, single drum, drum on back for spooling hose and wire, toolboxes, headache racks, mounted on 2003 Ford F550 4 x 4 dually truck with 6 liter diesel engine, new emergency brake, recently overhauled, includes pitless adapter tools Price: $45,500 USD
SMEAL 5T (Ref#13300RA)
Manufactured 2005, mounted on Ford F550 4x4 with diesel engine, AC, maximum capacity 12000#, per line 3000#, sandreel, toolboxes, heavy duty trailer hitch, sand reel pump hoist, max capacity 12,000 / per line 3,000 / max lay back 1 line/10 feet, approx 144,000 miles Price: $42,500
SMEAL 5T PUMP HOIST (Ref#2974T) Built 1971, mounted on 2005 Ford F650 truck, 138,000 miles, truck and rig in working condition Price: $59,500
SMEAL 5T PUMP HOIST (Ref#8971T)
Manufactured 2004, mounted on 2004 Ford F750 truck, approx. 21,000 miles, Cummins 5.9 engine, 7 speed transmission, 33,000# GVWR, no def, air brakes, air to rear, 4 x 2 drive, cathead, remote, no sandline Price: $65,000
SMEAL 5T PUMP HOIST (Ref#9918T)
Manufactured 1993, mounted on 1999 Ford F350 4 x 4 truck (245,000 miles), 6.8L V10 gas engine, automatic transmission, new tires, sandline with free fall, pipe racks, RKI service body Price: $67,000
SMEAL 5T PUMP HOIST (Ref#9613T)
Manufactured 2014, 2 line machine, sandline, 20’ mast, mounted on 2014 Ford F550 4x2 with 6.7L Power Stroke V8 diesel engine, 6 speed automatic transmission, 143,832 miles Price: $77,500
SMEAL 5T HRG PUMP HOIST (Ref#279T)
Manufactured 1988, mounted on 2009 Sterling Bullet 5500 4 x 4 truck, 42,300 miles, Cummins diesel engine, 4642 engine hours, aluminum utility bed Price: $59,000
SMEAL 5T PUMP HOIST (Ref#2690T)
Sandline, no cathead, remote control, 13’ utility body, toolboxes, mounted on 2000 Ford F550 2WD with diesel engine, PTO, 2 rear hydraulic leveling jacks Price: $23,500
SMEAL 5T PUMP HOIST (Ref#909T)
Unmounted, remote cable, hydraulic pump and all tools in tool boxes. 440’ of 2” pipe, 360’ of 3” Certa lock pipe, 950’ of 1” air hose, all fittings seen in photos (trailer in photo not included) Price: $31,500
SMEAL 5T PUMP HOIST (Ref#2926Tb)
Manufactured 1973, telescoping mast, new cable and hydraulics, mounted on 2009 Chevy 3500 dually, 190,000 miles Price: $48,000
SMEAL 5T PUMP HOIST (Ref#4224T)
Hoist manufactured late 1980’s, 2 lines, mainline and sandline, 500’ of domestic 3/8” cable on sandline, mounted on 2007 Dodge Ram 3500 4 x 4 truck with 6.7 Cummins engine, 6 speed transmission, PTO, no remote, 2 rear hydraulic leveling jacks. Tooled with 2 screen bailers, 1” 1.25” and 2” pipe elevators, misc tools for 4” and 5” residential and irrigation wells, Oxi acetylene torches Price: $45,000
SMEAL 5T PUMP HOIST (Ref#11390T)
Manufactured 1976, mounted on 1994 Ford F350 4 x 4 truck, 7.3 diesel engine, 5 sp transmission, newer brakes, 9’ utility body, 170,000 miles, 35,000 miles on rebuilt engine, 2 old style pipe racks, corded remote, front jack and wire winder Price: $42,500
SMEAL 5T PUMP HOIST (Ref#3483T)
Manufactured late 1970’s, 36’ derrick, mounted on 1992 Ford 450 2-wheel drive with diesel engine, standard transmission, new tires, toolboxes, no remote (but plumbed for it), no sandline, no cathead, 2 rear hydraulic leveling jacks Price: $42,500
SMEAL 5T PUMP HOIST (Ref#2892T)
Manufactured 1994, mounted on 1998 GMC Sierra 4-wheel drive with gas engine, 5 speed, bed rusted, Monroe utility box rusted, remote control, telescoping mast, no cathead, no sandline, toolboxes Price: $29,500
SMEAL 5T (Ref#1067Na) Mounted on 1992 Ford F350 4-wheel drive, dual wheels, 8’ flatbed, 460 gas engine, no cathead, 10,000# main winch, remote control, aluminum and steel toolboxes, 2 pipe racks, brand new tires, new fenders, 35’ mast, 100,000 miles Price: $42,500
SMEAL 5T PUMP HOIST (Ref#1258T)
Built early 1990’s, single line, 36’ derrick, remote, mounted on 1993 International 4700 truck with diesel engine, 6 speed transmission, toolboxes, rig runs well, brake lines on truck need work (rusted out), needs batteries, has not run since 2015 Price: $25,000
SMEAL 5T PUMP HOIST (Ref#1202T)
Manufactured 1970’s, mounted on 2016 Dodge Ram 4500 (not 4 x 4) with diesel engine, no sandline, toolboxes Price: $57,500
SMEAL 5T PUMP HOIST (Ref#3018T) Mounted on 1990’s Ford F350 truck 2WD with 7.3L diesel engine, PTO, windmill extension, dual back wheels, no sandline, no cathead, sitting a while, running when parked Price: $20,000
SMEAL 5T (Ref#9374T) Manufactured 1995, mounted on 1995 Ford F450 2-wheel drive truck with diesel engine, service body with toolboxes, 2 rear leveling jacks, remote control, no sandline Price: $29,500
SMEAL 5T PULLING UNIT (Ref#1618T) Manufactured 1987, double drum, 3 toolboxes on each side, mounted on 1987 Chevrolet single axle truck with 350 hp gas engine, rear leveling jacks, no cathead, no sandline Price: $27,500
SMEAL 5T PUMP HOIST (Ref#3248T)
Manufactured 1980’s, mounted on 1997 Chevy 3500 2-wheel drive truck with diesel engine, service body with toolboxes, telescoping mast, new tires, new batteries, new cable, no remote, good running condition Price: $42,500
SMEAL 5T PUMP HOIST (Ref#1289T)
Manufactured 1987, mounted on 1989 Ford F450 truck with 7.3 Ford diesel engine, manual transmission, 167,710 miles, winch valve needs work and valve leak inside of ram on jacks Price: $27,500
SMEAL 5T PUMP HOIST (Ref#6058T)
Manufactured 1975, mounted on 1995 Ford 4WD dually truck with 7.5 liter engine, 2 drums, main drum has stem down, 2 leveling jacks, truck 280,000 miles, hoist last used Summer 2023. Rig and truck both start and run Price: $27,600
SMEAL 5T (ref#4620Ta)
SMEAL 5T (ref#4620Ta) Manufactured 1978, mounted on 2000 Ford F550 4 x 2 truck with 7.3L diesel engine, 146,000 miles, 6 speed manual transmission, cathead, hoisting line, sandline, toolboxes Price: $39,500
Available at extra cost:
HYDRAULIC GROUT PUMP (Ref#4620Tb) Armstrong 5 x 6 piston pump, designed to pump 60 gpm, all hydraulic, variable speed, 95 gpm fresh water pump
SMEAL 5T (Ref#2240T)
Manufactured 1977, mounted on GMC truck with 292 gas engine, PTO, mainline, sandline, pipe racks, remote control, ready to go Price: $29,500
SMEAL 5T (Ref#6974NB)
Manufactured 1978, PTO, mounted on 1983 International with diesel engine, remote control, sandline, 2 rear hydraulic leveling jacks, windmill extension, needs paint and new hoses, sitting a while but running when parked Price: $18,500
SMEAL 5T (Ref#7179Tb)
Mounted on Ford F450 Price: $29,500
SMEAL 5T (Ref#9807Ta)
SMEAL 5T (Ref#3403Tb)
Manufactured 1982, cathead, sandline, mounted on 1979 International Harvestor truck (truck is no good), rig has not run for 10 years Price: $13,500
SMEAL 5T (Ref#13911RB) PTO, mounted on Chevy 1 ton, remote control, sandline, toolboxes Price: $19,000
SMEAL 4T BT SERIES PUMP HOIST (Ref#445T)
1990 International 4900 Series truck with mechanics body, air brakes, 466 IHC engine Price: $22,500
SMEAL R2RG PUMP HOIST (Ref#8872Tb)
No sandline, no cathead, mounted on older Ford with gas engine, PTO, remote control, utility bed, 2 rear hydraulic leveling jacks Price: $18,000 - Michigan
HUNKE 3T PUMP HOIST (Ref#2605T)
Manufactured 2016, mounted on 2016 Ford XLT F350 4x4 truck with 6.2L engine, approx. 130,000 miles, automatic transmission, heavy duty snow plow front springs, 3 leaves added to rear to firm up the ride, 9’ utility body, Rino liner in bed with rubber mat, wire rack for 1000’ spool of wire, pipe rack, hydraulic wire winder, weighted safety hook, stored inside Price: $89,000
HUNKE 3T (Ref#15188Tb)
SMEAL 3T PUMP HOIST (Ref#2975T)
Manufactured 2004, telescoping mast, remote, control, mounted on Ford F450 4-wheel drive with bad engine, hoist is in good shape, no sandline, no cathead, toolboxes, 2 rear hydraulic leveling jacks Price: $37,500
SMEAL 3T PUMP HOIST (Ref#2597T)
Manufactured 1980’s, mounted on 2000 Ford 550 2wd truck with 7.3 diesel engine, PTO, sandline, no cathead, plumbed for remote, toolboxes, 2 rear hydraulic leveling jacks, running condition Price: $37,500
SMEAL 3T (Ref#3910T)
Manufactured 1997, no sandline windmill extension, mounted on 1997 Ford F350 single axle 4 x 4 truck with 7.3L Powerstroke diesel engine, no cathead, 153,000 miles Price: $33,500
SMEAL 3T PUMP HOIST (Ref#6763T) Manufactured 1972, mounted on 2006 Ford dually 4WD with diesel engine, 5 speed transmission, remote control, 31’ telescoping mast, 2 rear leveling jacks Price: $32,500
SMEAL 3T (Ref#7520T)
Mounted on 1993 GMC dually 4 wheel drive truck with 454 gas engine, remote control does not work (needs repair), sandline, telescoping mast, toolboxes, 2 rear hydraulic leveling jacks Price: $21,500
SMEAL 3T (Ref#2351T) Unmounted, sandline (nop line), no cathead, remote (not wireless) Price: $10,500
SMEAL 3T (Ref#9905T) Mounted on 1989 Ford F350 Superduty 4-wheel drive, only 70,000 miles, no sandline (but sandline wheel available), front winch Price: $27,500
SMEAL 3T (Ref#3884Tb)
Sandline, 40' mast, no cathead, mounted on 1988 Ford 350 with 7.3L diesel (truck engine does not run, needs to be overhauled) Price: $11,500
SMEAL 32BT (Ref#7894Ta)
Manufactured 1994, no sandline, no cathead, 32' mast, mounted on 1994 Ford F350 4 x 4 truck, utiity boxes, 47,000 truck miles, located Canada, components were assembled in Canada Price: $24,500 PRICE REDUCED: $18,500 USD
SMEAL 32B (Ref#8349R)
Mounted on 1994 Chevy 3500 steel bed truck, 87,000 miles, high idle, main line, sandline, new cables, hydraulic outriggers Price: $30,000
KYLE 8K PUMP HOIST (Ref#8788T)
Manufactured 2008, no sandline, mounted on 2008 Ford F550 4 x 4 truck with 6.4L Powerstroke diesel engine, 135,000 miles, 10’ aluminum bed, aluminum toolboxes, remote, crane pedestal, hydraulic jacks Price: $85,000
KYLE 8K PUMP HOIST (Ref#4353T) Mounted on 2006 Ford F550 4WD truck, manual transmission, diesel engine, PTO, toolboxes, 3 rear hydraulic leveling jacks Price: $42,500
KYLE 8K PUMP HOIST (Ref#7568T)
KYLE 5K PUMP HOIST (Ref#139T)
Manufactured 2012, wire winder, hydraulic to rear, mounted on 2012 Dodge Ram 4500 truck, 112,000 miles, open bed, storage Price: $108,000
WELLMASTER BT-32B PUMP HOIST (Ref#3930T)
Mounted on 2024 Dodge Ram 1-ton dually 4 x 4 truck with 6000# BT-32B hoist, new hydraulics and drive motors, Honda drive unit, located Canada Price: $96,000 USD
STELLAR 6628 CRANE/PUMP HOIST (Ref#275T)
Lifting capacities: 2925 lbs @ 13’, 1350 lbs @ 28’, mounted on single axle 2002 International truck, toolboxes Price: $52,500
CARDWELL 4000’ PULLING UNIT (Ref#7683T)
In-line 6 cyl Ford gas deck engine, mounted on Ford 3WD truck with 7.3L diesel engine Price: $67,500
NATIONAL OILWELL VARCO 2500’ PULLING UNIT (Ref#4198RB)
National Oilwell Varco (DS) drawworks, 40’ derrick (45’ crown to ground), mounted on 1982 Ford 700 with Detroit V8 diesel engine, 11R22.5 tires (good shape), McKissick pulley, hydraulic leveling jacks front and rear, Price: $52,000
WILSON 2500’ PULLING UNIT (Ref#4198RC)
Wilson drawworks with disc clutches, 5/8” high strength cable, 40’ derrick (42’ from crown to ground), 200hp GM diesel deck engine, mounted on 1986 International with V8 diesel engine, 10.00 20 solid tires (rear tires are new), Price: $52,000
SWINGER MODEL 45 PUMP HOIST (Ref#2245T)
Mounted on 2009 Ford 750 extended cab, 325 hp Cummins, 31,000 GVW, locking rear end, manual transmission, air brakes, dual winches with 2 speed hydraulic motors, hydraulic wire winder, 4 leveling jacks, multiple toolboxes, 2 heavy duty pipe racks Price: $68,500
SWINGER PUMP HOIST (Ref#3709T)
Built 1990, 3 ton, mounted on 1990 Ford F350 4WD truck, 4 speed with overdrive transmission, new clutch 2018, recently replaced 460 engine (low miles), 28’ extended boom, 4000# winch on main line, 2500# sandline, 4 hydraulic leveling jacks, pulling tools, 6” pipe with caps to carry drop pipe, 5500 Honeywell 220/110 generator wired into outlet on back of truck to test run pumps, starter box in wiring, holders for spools of wire and rope on back, 4” bailer, 2” bailer, well maintained, last worked 2020 but started occasionally Price: $31,500
Also available ¾ ton flat bed with toolboxes
G & R PUMP HOIST (Ref#3954T)
Manufactured 1990, 12,000 lb lift capacity, mounted on 990 Ford F450 truck with diesel engine, approx. 70,000 miles, one owner rig Price: $50,000
G & R PUMP HOIST (Ref#3059T)
Manufactured 1984, mainline, sandline, mounted on 2000 International 4700 truck with DT466e, Eaton 7 speed manual transmission, approx. 415,000 miles (over 12,000 hours) on truck, Price: $48,500
FLEETMASTER PUMP HOIST (Ref#309Tb)
Manufactured 1999, mounted on Ford F550 Super Duty 4-wheel drive truck with diesel engine, no cathead, 1 winch, telescoping derrick, 2 rear hyd leveling jacks Price: $25,000
NATIONAL 500C CRANE TRUCK (Ref#8353Tb)
Built 1998, mounted on 1998 Ford F800 truck, 60,000 miles, 6570 rig hours, (2) toolboxes, Price: $45,000
AUTOCRANE 4004 TRUCK CRANE (Ref#8352T)
Mounted on 2012 Ford truck, diesel engine, 4000@ auto crane, pipe rack Price: $55,000
2008 STERLING PUMP HOIST/WATER TRUCK (Ref#3571T)
40,000# capacity, 47’ hydraulically raised boom rated at 20,000# static with Braden hydraulic winch, 8000 jib electric winch, mounted on 2008 Sterling LT9500 truck (20,000 kms), p/b Cat C13 diesel engine, 6 speed Allison automatic transmission, PTO, air ride suspension, steel flatbed with 1400 gallon water tank, 3’ X 9”H side rails, hydraulic pipe clamp, hydraulic outriggers, breakout and spinner controls, wireless remote Price: $115,000
PULLING UNIT (Ref#10917Tb)
Double drum, 40’ mast, mounted on International 4700 tandem axle truck, has pulled 1000’ of 8” casing (filled with water), tooling Price: $55,000
PUMP HOIST (Ref#5242Ta)
Mounted on 1983 Chevy truck with gas engine, 2 rear jacks, starts and runs Price: $32,500
SHOP BUILT PUMP HOIST (Ref#908T)
Can pull up to 30,000#, Pony gas deck engine, 1500’ of 3/8” sandline, 400’ of ½” main line, mounted on 1974 Ford F600 2WD truck with gas engine, no remote, no tools, 2 rear manual jacks Price: $11,500
MONITOR M42 PUMP HOIST (Ref#9137T)
Built 1973, mounted on 2009 Ford F350 truck with V10 gas engine, approx. 197,000 miles, no sandline, ready to work Price: $45,000
MONITOR M35 (Ref#10394Na)
30,000# capacity, sandline, aux line, mounted on International 1600 4-wheel drive truck with gas engine, PTO, Smeal fail-safe brakes on both drums, 130' of new 5/8" line, no tools PRICE REDUCED: $33,500
MONITOR M34 (Ref#10394Nb)
8,000# single line capacity, mast with 2' extension (37' total height), 130' of new 5/8" line, mounted on International 1600 4-wheel drive with gas engine, no tools Price: $37,500
MONITOR M34 (Ref#10093R)
Reworked 2005, 42’ mast, single line rating is without double lines. You can run another pulley (extra pulley included) to increase the lifting rating to double, PTO, mounted on 1994 GMC 6500 truckwith Cat diesel engine, Allison transmission, 2hyd jacks, toolboxes, 1 winches Price: $29,500
MONITOR 33 (Ref#2520Ta)Manufactured 1980's, mounted on 1990 GMC Topkick with gas engine, 2 wheel drive, no remote, no sandline or cathead, 2 rear hyd leveling jacks Price $27,500
MONITOR M33 (Ref#3693N) telescopic 33' mast with remote, mounted on 2000 Ford F250, located Canada PRICE: $30,000 CDN
MONITOR M33 PUMP HOIST (Ref#9321Tb)
Mounted on 1999 Ford F350 2-wheel drive truck, V10 gas engine, auto transmission Price: $26,500
MONITOR M33 (Ref#13491T)
6T hoist completely rebuilt, new hydraulic hoses, pins and bushings. Mounted on 1997 Ford F450 2wd truck 7.3 diesel engine, 11' service body, 123k miles Price: $26,500
MONITOR M-33 (Ref#11730R)
Unmounted, manufactured 1972, hydraulic pump, no cathead, no sandline, no remote control Price: $10,500
MONITOR PUMP HOIST (Ref#9133Tb)
Unmounted, no line, no engine, not used since 2015 Price on Request
MONITOR PUMP HOIST (Ref#4329T) Unmounted, single line, can pull 25’ without extending the mast, telescoping mast, remote control, no cathead, no sandline, 2 rear hydraulic jacks Price on Request
G & R 400 PUMP TRUCK (Ref#6504T) Mounted on 1986 International 1900 truck with 6.9L diesel engine, 24 cfm air compressor, walking beam, drive casing with 350# hammer, good for 2 – 4" well development, leak in hoist control valve Price: $22,000
G & R 1200 PUMP HOIST (Ref#11060T) Manufactured 1980, Mounted on 1984 Mack truck, Mack 300 hp diesel engine, new PTO, pump, cable, hyd valves, paint, pins, 5 speed, 167,000 miles, 36' mast, no sandline, no toolboxes, 2 rear jacks, pipe racks PRICE: $35,000
G & R PUMP HOIST (Ref#6423T)
Unmounted, all standard features, sitting two years (running when parked) Price: $16,500
2 TON PUMP HOIST (Ref#158N)
1974, mounted on 1989 International truck, diesel DT360 International engine, spudder attachment, excellent condition PRICE REDUCED: $29,500
CYCLONE F40 PUMP HOIST (Ref#8537T)
Mounted on 1973 Chevy 3/4 ton 4 x 4 truck, 350 Chevy engine, no sandline, no cathead, 30' mast, approx 52,500 miles Price: $17,500
CYCLONE 30 PUMP HOIST (Ref#5688T)
Mounted on 1987 Chevy 1 ton truck, 350 cu in 4 bolt main, currently working Price: $14,000
CYCLONE 5 PUMP HOIST (Ref#5242Tc)
Mounted on 1979 Chevy truck with gas engine, 2 rear jacks, starts and runs, gone through 2022 Price: $32,500
JESSEN M-33 PUMP HOIST (Ref#2591R)
Manufactured 1979, PTO, mounted on Ford F-600 2 wheel drive with propane engine, 1 winch, 30’+ mast, no sandline or cathead, 2 rear leveling jacks, utility boxes, ready to go. Second rig available: same specs as above, manufactured 1977, sitting a long time, needs work Price: $19,500 for both
SEMCO S14H HYDRO WRENCH (Ref#9516T)
with 12’ of ¾” hydraulic hose with couples, one year old, never been used Price: $5,950
WANTED:
SMEAL 50T - SMEAL R36 - SMEAL R20, SMEAL R12, SMEAL 12T
SEMCO S30000 - S25000 - S20000
PULSTAR P38000 - P29000 - P20000 - P12000
